China Moair Eco-Friendly Energy Saving High Quality Professional Energy-Efficiency Good Service Industrial Equipment Air Compressor small air compressor

Merchandise Description

Moair Eco-pleasant Vitality Preserving Large Quality Expert Power-efficiency Excellent Provider Industrial Tools Air Compressor

Item Description

The MDE sequence 2 phase rotary screw air compressor with double everlasting magnet motor generate is geared up with a double motor, double travel and double screw, which has the gain of higher performance, big starting up torque and lower sounds. The major power selection is from 45kw to 110kw, the pressure variety is from 6bar to 10bar and the air circulation assortment is from 9mthree/min to 26mthree/min.

Core factors

Motor 

 

  • A lot more stable: no mechanical transmission problems
    There is no gear shaft in the air compressor and the successful everlasting magnet motor and the male rotor are immediately linked on 1 shaft without having equipment travel, which can eliminate pitting of equipment or concealed troubles of tooth fracture.
    With out shaft coupling, 2 built-in PM motors straight drive 2 airends of the air compressor, staying away from the concealed difficulties of shaft coupling failure.
  • Far more strength-financial savings: the airend is constantly in a easy operating condition
    The 2 stage 3 phase long term magnet rotary gear screw air compressor of CZPT is driven by 2 impartial PM motors and 2 unbiased inverters, which is intelligently managed this kind of as hold the airend operating at a very best amount-pressure position by managing discharge stress and interstage pressure under the circumstance of distinct rotary velocity and distinct force. The very best operating pace of air compressor can be immediately calculated even though working and then the compression ratio can be well balanced by final match, which can preserve the compressor in a greatest working state, thus obtaining the maximum efficiency.
  • More powerful: high-effectiveness permanent magnet motor and no equipment generate decline.
    With a motor of a high security degree of IP54, it is far more strength-saving and it can stay effective at reduced frequency and reduced pace.
  • More environment-pleasant procedure with reduce sound
    No noise of motor bearings, gear meshing and coupling transmission.
  • Much more framework-compact
    The quantity of PM motor is small and the composition is compact, which can help save a lot place.

 

Theory of energy-saving

  • Modify the standard induction motor with high-performance engineering of long lasting magnet rotary screw motor, thus minimizing the consumption in transmission.
  • Powered by 2 independent PM motors and 2 independent inverters, the compressor is intelligently controlled such as preserve the airend running at a ideal amount-stress stage by controlling force of air stream and interstage pressure beneath the circumstance of different rotary pace and different stress. The ideal managing speed of compressor can be immediately calculated although running and then the compression ratio can be well balanced by last match, which can maintain the compressor in a best working state, therefore acquiring the highest effectiveness.
  • Because the equipment ratio is mounted, level performance is emphasised in this case. That is to say, only with set rotary pace and rated stress did it have the greatest certain energy. When working in a point out of variable velocity and variable frequency, thinking about the fixed speed of gear, interstage stress will not get to the greatest one particular. Rotational speed declining whilst strength consumption not declining at the same time, it is not suited for operating in variable speed and variable frequency point out.

Firm Profile

FAQ

Q1: What ‘s your manufacturing unit tackle
A2: Our business is positioned in NO.88 CZPT Highway,HangZhou ,ZheJiang ,China

Q2: How lengthy is our supply
A2: Our regular shipping time is 30-forty days following affirmation order & obtaining recipets for common compressors, for the other non common need will be mentioned circumstance by situation.

Q3: Can you accept OEM orders? 
A3: Yes, with professional design group, OEM orders are extremely welcome.

 


/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|



/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Samples:
US$ 15000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Moair Eco-Friendly Energy Saving High Quality Professional Energy-Efficiency Good Service Industrial Equipment Air Compressor     small air compressor China Moair Eco-Friendly Energy Saving High Quality Professional Energy-Efficiency Good Service Industrial Equipment Air Compressor     small air compressor
editor by CX 2023-03-27